Fitting Our Ceramic Light Pull

Our traditional cistern style Ceramic Light Pull has been designed so it can be attached in the original manner to a chain or to a light cord.
The two holes as shown in the below diagram are for a chain to be attached so the ceramic pull can be used as a cistern pull if required.
 
Alternatively, to use as a light pull please follow the below instructions:
  • Unscrew the brass or chrome top from ceramic pull.
  • Thread the light pull string through the hole in the top and tie a small knot. Pull as tight as you can and cut off any excess. You can always us a lighter to melt the end of the cord to form a blob so the cord does not pull back through the hole.
  • Once the knot is tied or melted you can then screw the brass or chrome cap back onto the light pull.